Binding Type 10 Wheeler Truck Tire Pressure Monitoring System
TPMS Benefits
Puncture Protection: Real time monitor pressure and temperature nip in the bud.
Save the Fuel: Keeping correct tire pressure, lower fuel consumption.
Less Treadwear: Insufficient pressure causes treadwear which shorten the tire life span.
component of product
Sensor and receiver corresponding wheel position number
Alarm function
leakage warning
Product parameters
| Receiver(26 rounds) |
|
| Display interface |
LCD segment code (26 tires with the same display) |
| Receiver port |
Vehicle battery, ACC input and RS232 output(about receiver) |
| Machine weight (excluding packaging) |
230gram±5gram |
| Abnormal self-recovery |
Toggle Switches(The switch is facing up, restart after disconnecting the external power supply.) |
| Working temperature |
-30℃-80℃ |
| Power supply mode |
Internal rechargeable lithium battery and external power supply |
| Interface voltage |
Vehicle battery 24V, ACC24V |
| Built-in battery voltage |
3.5V-4.2V |
| Bright working current |
12mA |
| Black working current (for data communication) |
4.5mA |
| Reception sensitivity |
-95dbm |
| Dimensions |
13.5cm*6.5cm*2.2cm |
| Pressure range |
0bar~14bar/0psi~203psi |
| type |
TRUCK TPMS FOR 10 wheeels |
| color |
black |
Black color Universal internal binding type ten tire Truck TPMS For Trailer Truck non include repeater
| Sensor (internal binding type sensor) |
|
| Plastic parts material |
Nylon + glass fiber |
| Machine weight (excluding bind belt) |
30gram±1gram |
| Shell temperature resistance |
-50-150℃ |
| bind belt material |
304 stainless steel |
| Power supply mode |
Button Battery |
| battery model |
CR2050 |
| battery capacity |
345mAh |
| Working voltage |
2.1V-3.6V |
| Working temperature |
-40℃-125℃ |
| working temperature |
8.7mA |
| Self-test current |
2.2mA |
| Dormant current |
0.5uA |
| Working temperature |
-40℃-125℃ |
| Transmit frequency |
433.92MHZ |
| Transmit power |
>-12dBm |
| Dimensions : |
7.3cm(length)*2.73cm(width)*2.2cm(height)(excluding antenna) |
Product attention
Sensor monitors pressure and temperature of tire and signal to receiver, receiver reports pressure and temperature by number and voice. If there is any abnormal pressure or temperature, flashing warning icon and voice prompt will notice driver immediately.
Drivers need to check and repair the tire immediately, in order to avoid risk of accident due to tire problem.
Tires have natural micro leakage phenomenon. It is a normal phenomenon that pressure of tire decreases over time. Pressure decreasing don't have directly relationship with install this products.
It is a normal phenomenon that pressure is unstable due to thermal expansion during driving. It don't have directly relationship with install this products.
Incorrectly installation will affect the use of this product or make damage. experienced technician is preferred to install this product. please be careful not to damage the sensor transmitter when disassembling tires again. Valve of internal sensor is not available for repeat assembling/disassembling.
Please use power cable provided by factory. It is not allowed to tie receiver by power cable, as I will damage product or effect signal . And you will lose warranty.
Most of the DVD or other high power equipment in the market are all have electromagnetic interference. In order to avoid electromagnetic interference, receiver is suggest to install 50CM away from such kind of products. The best position is upper left corner, upper right corner of A column and middle of front seats (away from control)
There won't be notice if there is any change of products ( performance, specifications, warranty).
* This system send signal by wireless transmission, so it may not receive signal under some certain condition, like interference, error operation or improper installation. If receiver can't receive signal for 10 minutes, please drive car away from current place ( maybe there is strong signal interference ) or go to authorized tire repair center to check is there any problem of sensor or battery of sensor is run out( battery life maybe shorter than normal use, as there is often abnormal condition occurs, sensor need to send signal to warn driver.)
FAQ
Q1: What is your product and technique?
A: We produce TPMS products and measure tire pressure, temperature, acceleration through TPMS products show you.
Q2: What is your product apply fields?
A: Our productsare applied to Automotive electronics industry.
Q3: How does purchase your existing product or customized my product?
A-1: Existing product: Please go to choose your favorite product and memorize product code, determine product request (e.g.: color, lids / top, etc.) and order quantity, together with your consignee address, phone, name and port of discharge etc.
A-2: Customized your product: Please mailing your existing sample to us. If you have own design drawing (Include material name, component weight, size, and configuration etc.details),
A-3: Once receive your any information or sample, we will send best price and order process to you within 24 hour and continuously follow-up services for you, answer your any problem, until your receive the goods.
Q4: Are the product dependable?
A: Yes, we are dealing with Automotive electronics industry since 2013. We are attention to each client request and feedback; we have established long term cooperation with them. All productsare top-quality and quality guaranteed.
Product Tags:
|
|
Binding Type 10 Wheeler Truck Tire Pressure Monitoring System Images
|
